Biblioteca da Universidade do Minho Search for '0106-6366'

Designing plates for minimum internal resonance

By Niels Leergaard Pedersen. Lyngby Technical University of Denmark 2004 . 19 p. 21 cm.

Place Hold on Designing plates for minimum internal resonance

Relaxation oscillations and canards in a nonlinear model for discontinuous plastic deformation in metals at very low temperatures

By Morten Brons. Lyngby Technical University of Denmark 2004 . 15 p. 21 cm.

Place Hold on Relaxation oscillations and canards in a nonlinear model for discontinuous plastic deformation in metals at very low temperatures

Instabilities in power law gradient hardening materials

By Christian F. Niordson, Viggo Tvergaard. Lyngby Technical University of Denmark 2004 . 21 p. 21 cm.

Place Hold on Instabilities in power law gradient hardening materials

On shrink fit analysis and design

By Pauli Pedersen. Lyngby Technical University of Denmark 2004 . 17 p. 21 cm.

Place Hold on On shrink fit analysis and design

Efficiency and tuning of viscous dampers on discrete systems

By Joseph A. Main, Steen Krenk. Lyngby Technical University of Denmark 2004 . 39 p. 21 cm.

Place Hold on Efficiency and tuning of viscous dampers on discrete systems

Evaluation of pod-bases decomposition techniques applied to parameter-dependent non-turbulent flows

By Erik Adler Christensen, Morten Brons, Jens Norkaer Sorensen. Lyngby Technical University of Denmark 1998 . 28 p. 21 cm.

Place Hold on Evaluation of pod-bases decomposition techniques applied to parameter-dependent non-turbulent flows

Streamline topologies near a fixed wall using normal forms

By Johan Nicolai Hartnack. Denmark Technical University of Denmark 1998 . 24 p. 21 cm.

Place Hold on Streamline topologies near a fixed wall using normal forms

Empirically based gamma-distributed stochastic wall pressure field in silo

By Ove Ditlevsen, K. Nikolaj Berntsen. Denmark Technical University of Denmark 1998 . 19 p. 21 cm.

Place Hold on Empirically based gamma-distributed stochastic wall pressure field in silo

Nonlocal plasticity effects on the tensile properties of a metal matrix composite

By Christian F. Niordson, Viggo Tvergaard. Lyngby Technical University of Denmark 2000 . 15 p. 21 cm.

Place Hold on Nonlocal plasticity effects on the tensile properties of a metal matrix composite

Model of contact between rollers and sprockets in chain drive systems

By Sine L. Pedersen. Lyngby Technical University of Denmark 2005 . 25 p. 21 cm.

Place Hold on Model of contact between rollers and sprockets in chain drive systems

Slow high-frequency effects in mechanics

By Jon Juel Thomsen. Lyngby Technical University of Denmark 2005 . 26 p. 21 cm.

Place Hold on Slow high-frequency effects in mechanics

Topology optimization of free vibrations of fiber laser packages

By Lars Voxen Hansen. Lyngby Technical University of Denmark 2004 . 19 p. 21 cm.

Place Hold on Topology optimization of free vibrations of fiber laser packages

On design of fiber-nets and orientation for eigenfrequency optimization of plates

By Niels Leergaard Pedersen. Lyngby Technical University of Denmark 2005 . 21 p. 21 cm.

Place Hold on On design of fiber-nets and orientation for eigenfrequency optimization of plates

Topology optimization of channel flow problems

By Allan Gersborg-Hansen, Ole Sigmund, Robert B. Haber. Lyngby Technical University of Denmark 2004 . 19 p. 21 cm.

Place Hold on Topology optimization of channel flow problems

Predicting vibration-induced displacement for a resonant friction slider

By Alexander Fidlin, Jon Juel Thomsen. Lyngby Technical University of Denmark 2000 . 12 p. 21 cm.

Place Hold on Predicting vibration-induced displacement for a resonant friction slider

Crack growth predictions by cohesive zone model for ductile fracture

By Viggo Tvergaard. Lyngby Technical University of Denmark 2000 . 18 p. 21 cm.

Place Hold on Crack growth predictions by cohesive zone model for ductile fracture

Straight-sided, buckling-driven delamination at high stress level

By Henrik Myhre Jensen, Izhak Sheinman. Lyngby Technical University of Denmark 2000 . 22 p. 21 cm.

Place Hold on Straight-sided, buckling-driven delamination at high stress level

A stochastic still water response model

By Peter Friis Hansen, Ove Ditlevsen. Lyngby Technical University of Denmark 2000 . 15 p. 21 cm.

Place Hold on A stochastic still water response model

Topology optimization in wavelet space

By Thomas A. Poulsen. Lyngby Technical University of Denmark 2000 . 17 p. 21 cm.

Place Hold on Topology optimization in wavelet space

Axisymmetric analytical stiffness matrices with green-lagrance strains

By Pauli Pesersen. Lyngby Technical University of Denmark 2004 . 16 p. 21 cm.

Place Hold on Axisymmetric analytical stiffness matrices with green-lagrance strains

Design of planar articulated mechanisms using branch and bound

By Mathias Stolpe, Atsushi Kawamoto. Lyngby Technical University of Denmark 2004 . 52 p. 21 cm.

Place Hold on Design of planar articulated mechanisms using branch and bound

Non-linear springing excitation due to a bi-directional wave field

By Jelena Vidic-Perunovic, Jorgen Juncher Jensen. Lyngby Technical University of Denmark 2005 . 20 p. 21 cm.

Place Hold on Non-linear springing excitation due to a bi-directional wave field

A direct analysis of elastic contact

By Pauli Pedersen. Lyngby Technical University of Denmark 2005 . 19 p. 21 cm.

Place Hold on A direct analysis of elastic contact

Annual report

Lyngby Technical University of Denmark 1973

Place Hold on Annual report

Reliability bounds for series systems with highly correlated failure modes

By Ove Ditlevsen. Lyngby Technical University of Denmark 1981 . 15 p. 21 cm.

Place Hold on Reliability bounds for series systems with highly correlated failure modes

On the stress state dependence of creep rupture

By Viggo Tvergaard. Lyngby Thecnical University of Denmark 1985 . 34 p. 21 cm.

Place Hold on On the stress state dependence of creep rupture

A finite algorithm for linear L1 estimation

By Kaj Madsen, Hans Bruun Nielsen. Lyngby Technical University of Denmark 1991 . 18 p. 21 cm.

Place Hold on A finite algorithm for linear L1 estimation

On the numerical radiation condition in the steady state wawe problem

By Peter Schjeldahi Jensen. Lyngby Technical University of Denmark 1985 . 29 p. 21 cm.

Place Hold on On the numerical radiation condition in the steady state wawe problem

Vibrations of imperfect ship plating

By J. Wedel-Heinen, P. Terndrup Pedersen. Lyngby Technical University of Denmark 1991 . 28 p. 21 cm.

Place Hold on Vibrations of imperfect ship plating

An analysis of the brittle-ductile transition in dynamic crack growth

By V. Tvergaard, A. Needleman. Lyngby Technical University of Denmark 1992 . 22 p. 21 cm.

Place Hold on An analysis of the brittle-ductile transition in dynamic crack growth

An analytical model to predict optimal material properties in the context of optimal structural design

By Martin P. Bendsoe... [et al.]. Lyngby Technical University of Denmark 1992 . 23 p. 21 cm.

Place Hold on An analytical model to predict optimal material properties in the context of optimal structural design

An efficient method for analyzing pipe networks

By Hans Bruun Nielsen. Lyngby The Technical University of Denmark 1987 . 21 p. 21 cm.

Place Hold on An efficient method for analyzing pipe networks

Bifurcation and stability analysis of a rotating beam

By Peter Gross, Metin Gurgose, Wolfhard Kliem. Lyngby Technical University of Denmark 1991 . 15 p. 21 cm.

Place Hold on Bifurcation and stability analysis of a rotating beam

Stresses in containships

By J. Juncher Jensen, P. Terndrup Pedersen, J. Buss Petersen. Lyngby Technical University of Denmark 1992 . 19 p. 21 cm.

Place Hold on Stresses in containships

Development of final creep failure in polycrystalline aggregates

By Erik van der Giessen, Viggo Tvergaard. Lyngby Technical University of Denmark 1993 . 34 p. 21 cm.

Place Hold on Development of final creep failure in polycrystalline aggregates

Elastic buckling problem with infinitely many local modes

By Esben Byskov. Lyngby Technical University of Denmark 1986 . 32 p. 21 cm.

Place Hold on Elastic buckling problem with infinitely many local modes

Finite element analysis and optimization of a fluid-conveying pipe

By Mikael Langthjem. Lyngby Technical University of Denmark 1994 . 29 p. 21 cm.

Place Hold on Finite element analysis and optimization of a fluid-conveying pipe

Dynamics of ships running aground

By P. Terndrup Pedersen, Bo Cerup Simonsen. Lyngby Technical University of Denmark 1995 . 20 p. 21 cm.

Place Hold on Dynamics of ships running aground

On global design description for orientational strength optimization

By Pauli Pedersen, Velaja B. Hammer. Lyngby Technical University of Denmark 1994 . 9 p. 21 cm.

Place Hold on On global design description for orientational strength optimization

Pressure and set-down for higher order stokes waves on a current

By Ivar G. Jonsson, Henrik Kofoed-Hansen. Lyngby Technical University of Denmark 1992 . 17 p. 21 cm.

Place Hold on Pressure and set-down for higher order stokes waves on a current

Correlation between microstructure variability and local stress field in two-phase materials

By Ryszard Pyrz. Lyngby Technical University of Denmark 1993 . 17 p. 21 cm.

Place Hold on Correlation between microstructure variability and local stress field in two-phase materials

Parametrization in laminate design for optimal compliance

By V. B. Hammer... [et al.]. Lyngby Technical University of Denmark 1995 . 24 p. 21 cm.

Place Hold on Parametrization in laminate design for optimal compliance

Shells

By Jes Christoffersen. Lyngby Technical University of Denmark 1995 . 41 p. 21 cm.

Place Hold on Shells

Collapse of the keldysh chains and stability of continuous non-conservative systems

By O. N. Kirillov, A. P. Seyranian. Lyngby Technical University of Denmark 2002 . 41 p. 21 cm.

Place Hold on Collapse of the keldysh chains and stability of continuous non-conservative systems

Optimal design of elastic plates with a constraint on the slope of the thickness function

By Frithiof Niordson. Lyngby Technical University of Denmark 1981 . 20 p. 21 cm.

Place Hold on Optimal design of elastic plates with a constraint on the slope of the thickness function

Scalar decomposition of elastic waves scattered by planar cracks

By Steen Krenk. Lyngby Technical University of Denmark 1983 . 15 p. 21 cm.

Place Hold on Scalar decomposition of elastic waves scattered by planar cracks

A note on rotor instability caused by liquid motions

By Olav Holm-Christensen, Kim Trãger. Lyngby Technical University of Denmark 1989 . 23 p. 21 cm.

Place Hold on A note on rotor instability caused by liquid motions

A theory for pretwisted elastic beams

By Steen Krenk. Lyngby Technical University of Denmark 1982 . 23, [4] p. 21 cm.

Place Hold on A theory for pretwisted elastic beams

Optimal design of thin-walled cylinders of variable wall-thickness subjected to flexural and torsional stiffness constraints

By Richard D. Parbery, Niels Olhoff. Lyngby Technical University of Denmark 1986 . 13 p. 21 cm.

Place Hold on Optimal design of thin-walled cylinders of variable wall-thickness subjected to flexural and torsional stiffness constraints

Strength reduction of woven glass fabric composite after creep deformation

By Ryszard Pyrz. Lyngby Technical University of Denmark 1987 . 22 p. 21 cm.

Place Hold on Strength reduction of woven glass fabric composite after creep deformation